So, my 2000 V70R engine seized awhile ago. I've decided to rebuild it better, stronger, faster ( 'Merica). I had another thread documenting the breakdown, but I wanted a clean thread to start the rebuild.
Here's what I have:
2000 V70R with 136,054 miles. Silver with two tune black/grey interior. Modifications not related to the engine, but are staying on the car:
Ohlins 8-way adjustable shocks front and rear.
TME Sport Springs for Ohlins shocks.
TME Strut tower brace.
Ronal R39 18"x 8.5" Wheels with Bridgestone Potenza Pole Position XL tires 235/40R-18.
IPD Swaybars and end links, front and rear
IPD Big Brake Kit (front only) with stainless steel brake lines (front and rear).
Porterfield R-4S Carbon/Kevlar brake pads with a set of R1-4 for track day use.
Brembo 330mm High Carbon rotors.
BMC/CDA Air filter and housing.
Snabb Intake pipe.
Custom 3" Intercooler with custom 2.5" RIP piping.
Plus, various other cosmetic odds and ends. (http://volvospeed.com/vs_forum/garage/vehicle/1421-volvo-v70r/ for more info.)
How it sits while preparing for the new engine/transmission.
What I plan to install:
An B5244T3 LPT engine from an '02 S60. This engine is currently being evaluated at a local machine shop.
An M66C 6 Speed manual AWD Transmission from an '04 S60 AWD. Arrived with no Bevel gear or harness.
My plan is to build a 400+ HP engine (~320-350AWHP). I'm maintaining the AWD (hence the M66C).
Things I have purchased, or plan to purchase for the build:
Purchased so far:
ENEM Performance Cams.
CoolingMist.com Stage 3 w/ Failsafe Meth/Water Injection system
Snabb Intake Manifold Spacer
"Ultimate Copper" Exhaust Gasket
'04 R Exhaust Manifold
FiveO 650cc Injectors
OEM lower engine mounts
Timing Belt
Water pump
Holland Tranny Bracket
Still left to Purchase:
ARD 20T housing (already have 11 Blade Compressor and 11 blade impeller wheels from ARD).
ARD tune (current is ARD Blue, But looking to get ARD Platinum).
Rods and bolts
ARP Head Studs
Oil Catch Can
Rings
Cylinder Shims
PTC Valve Assy
Shifter Assy
Shifter Cables
Pedal Assy
Tranny harness
Clutch assy
Master Clutch
Flywheel
Pressure Plate
'00 XC Right Front Axle
Axle Seals
Thanks to Lookforjoe and BlackT5 for the advice so far on what's needed for the manual swap.
If anyone can think of anything else I would need/should be looking at to get to the 400+ goal, please let me know.
More soon.